Finally re-installed my radios in my F150 Ford pick up. I wanted to clean up the installation a bit. I used a over head storage/gun shelf I purchased through JC Whitney. I then obtained some light gauge metal the length of the shelf, had it bent. Then with careful measuring I cut openings for my cobra CB radio, Yaesu FT-100D, Z100 auto tuner, and the Bearcat scanner. I also drilled out all mounting holes for brackets and for attaching the metal cover to the shelf. everything is held together with 3/16" fasteners. (nut and bolt combos).  all wiring and coax is routed to centralized plug in play on back of shelf hidden from all view.